We are an ISO-certified company. We are looking for a sales channel partner for our products in your country.
Categories
SSPS Powder Sintered Filter Cartridge SEREN SSPS Powder Sintered Filter Cartridges areconstructed with stainless steel powder. First shaped with pressure and then sintered under high temperatureby applying unique technology and strict productionprocess. Features include high mechanical strength, high temperature resistance, even pore distribution, and cleanable Features and Benefits • ALL-Stainless Steel Construction • Free Particle Release • High Temperature and Oxidative and Corrosive Resistant • High Voids, Lower Filtration Resistance, and Excellent • Permeability • Even Construction, Narrow Pore Distribution, and High • Separation Efficiency • Fixed and Controlled Shape to Withstand High • Reverse-Flow Materials of Construction Configurations Nominal Dimensions Diamters :60mm Additional Diameter Specifications Available Upon Reques Operating Conditions Parameters • Testing Method: Bubble Point Method • Testing Performed According to GB/T5453; Testing DP is 200Pa; Testing Medium is Air • Testing Liquid Viscosity is 1CP.S; Filter Tested with 60mm diameter and 300mm length; Testing Pressure is 1.5 bar Length and Area Ordering Information Cleaning Methodss Physical Cleaning Methods: Reverse-Flow by Clean Water; Reverse-Blow by Clear Air and Ultrasonic WaveChemical Cleaning Methods: Use Cleaning Agent Such As Diluted Acid, Diluted Alkalis, Oxidizer, and Surfactant Cleaning Methodss Notes 1. Avoid artificial damages such as scratches, bumps, and smashesduring the cleaning, disassembling, and assembling processes. Please DO NOT exert force on the filter cartridge surface. 2. In general, filtration direction is from outside, in. Reverse filtration IS NOT recommended. 3. Increase pressure to the required operating pressure slowly whilefiltering. Please DO NOT increase pressure instantly. 4. Operating pressure SHOULD NOT exceed 0.6Mpa. Flush in place reversely with clean liquid or blow in place reversely with clean airin time. Pressure of reverse blow SHOULD NOT exceed 0.75Mpa 5 Reverse-fiush and Reverse-blow Procedures: First reverse-blow with clean air under pressure that is 1.2-1.5 times greater than operating pressure. Reverse-blow lasts for 3-5 seconds and repeat 4-6 times. Finally reverse-�ush with clean liquid for 3-5 minutes and repeat 2-3 times. 6. If the pressure damage is still serious after NOTE E, please DISSAMBLE the filter cartridge to clean.
SEREN SSPS Powder Sintered Filter Cartridges areconstructed with stainless steel powder. First shaped with pressure and then sintered under high temperatureby applying unique technology and strict productionprocess. Features include high mechanical strength, high temperature resistance, even pore distribution, and cleanable
• ALL-Stainless Steel Construction
• Free Particle Release
• High Temperature and Oxidative and Corrosive Resistant
• High Voids, Lower Filtration Resistance, and Excellent
• Permeability
• Even Construction, Narrow Pore Distribution, and High
• Separation Efficiency
• Fixed and Controlled Shape to Withstand High
• Reverse-Flow
Diamters :60mm
Additional Diameter Specifications Available Upon Reques
• Testing Method: Bubble Point Method
• Testing Performed According to GB/T5453; Testing DP is 200Pa; Testing Medium is Air
• Testing Liquid Viscosity is 1CP.S; Filter Tested with 60mm diameter and 300mm length; Testing Pressure is 1.5 bar
Physical Cleaning Methods: Reverse-Flow by Clean Water; Reverse-Blow by Clear Air and Ultrasonic WaveChemical Cleaning Methods: Use Cleaning Agent Such As Diluted Acid, Diluted Alkalis, Oxidizer, and Surfactant
Notes
1. Avoid artificial damages such as scratches, bumps, and smashesduring the cleaning, disassembling, and assembling processes. Please DO NOT exert force on the filter cartridge surface.
2. In general, filtration direction is from outside, in. Reverse filtration IS NOT recommended.
3. Increase pressure to the required operating pressure slowly whilefiltering. Please DO NOT increase pressure instantly.
4. Operating pressure SHOULD NOT exceed 0.6Mpa. Flush in place reversely with clean liquid or blow in place reversely with clean airin time. Pressure of reverse blow SHOULD NOT exceed 0.75Mpa
5 Reverse-fiush and Reverse-blow Procedures: First reverse-blow with clean air under pressure that is 1.2-1.5 times greater than operating pressure. Reverse-blow lasts for 3-5 seconds and repeat 4-6 times. Finally reverse-�ush with clean liquid for 3-5 minutes and repeat 2-3 times.
6. If the pressure damage is still serious after NOTE E, please DISSAMBLE the filter cartridge to clean.
Get Quote
